Saving The Configuration - HP 1920 Gigabit Ethernet Switch Series User Manual
Hp 1920 gigabit ethernet switch series
Hide thumbs
Also See for 1920 Gigabit Ethernet Switch Series:
- User manual (547 pages) ,
- Getting started manual (33 pages) ,
- Supplementary manual (63 pages)
Table of Contents
Advertisement
To restore the configuration:
1.
Select Device > Configuration from the navigation tree.
2.
Click the Restore tab.
Figure 54 Restoring the configuration
3.
Click the upper Browse button.
The file upload dialog box appears.
4.
Select the .cfg file to be uploaded, and click OK.
5.
Click the lower Browse button.
The file upload dialog box appears.
6.
Select the .xml file to be uploaded, and click OK.
Saving the configuration
You save the running configuration to both the .cfg configuration file and .xml configuration file that will
be used at the next startup.
Saving the configuration takes some time.
Only one administrator can save the configuration at a moment. If you save the configuration while the
system is saving the configuration as required by another administrator, the system prompts you to try
again later.
You can save the configuration in either of the following modes:
Fast mode.
•
To save the configuration in fast mode, click the Save button at the upper right of the auxiliary
area.
65
Hide quick links:
Advertisement
Table of Contents
