Configuring And Displaying Clients' Ip-To-Mac Bindings - HP 1920 Gigabit Ethernet Switch Series User Manual

Configuring and displaying clients' IP-to-MAC
bindings
1. From the navigation tree, select Network > DHCP to enter the default DHCP Relay page shown
in Figure
2. In the User Information area, click User Information to view static and dynamic bindings, as shown
in Figure
Figure 277 Displaying clients' IP-to-MAC bindings
3. Click Add to enter the page as shown in
Figure 278 Creating a static IP-to-MAC binding
4. Configure the static IP-to-MAC binding as described in
5. Click Apply.
Table 97 Configuration items
Item
IP Address
MAC Address
Interface Name
274.
277.
Description
Enter the IP address of a DHCP client.
Enter the MAC address of the DHCP client.
Select the Layer 3 interface connected with the DHCP client.
IMPORTANT:
The interface of a static binding entry must be configured as a DHCP relay agent.
Otherwise, address entry conflicts might occur.
Figure 278.
Table
302
97.