Configuring Dhcp Relay Agent; Overview - HP 1920 Gigabit Ethernet Switch Series User Manual

Configuring DHCP relay agent

Overview

Since the DHCP clients request IP addresses through broadcast messages, the DHCP server and clients
must be on the same subnet. Through a DHCP relay agent, DHCP clients can get IP addresses from a
DHCP server on another subnet. This feature avoids deploying a DHCP server for each subnet to
centralize management and reduce investment.
relay agent.
Figure 272 DHCP relay agent application
The DHCP server and client interact with each other in the same way regardless of whether the relay
agent exists (see
address allocation
The following only describes steps related to the DHCP relay agent:
1. After receiving a DHCP-DISCOVER or DHCP-REQUEST broadcast message from a DHCP client,
the DHCP relay agent fills the giaddr field of the message with its IP address and forwards the
message to the designated DHCP server in unicast mode.
2. Based on the giaddr field, the DHCP server returns an IP address and other configuration
parameters in a response.
3. The relay agent conveys the response to the client.
"DHCP overview"). For more information about DHCP packet exchange, see
process."
Figure 272 shows a typical application of the DHCP
297
"IP