Configuration Procedure - HP 1920 Gigabit Ethernet Switch Series User Manual

Figure 234 Network diagram
1.1.1.1/24
Source

Configuration procedure

Configuring Router A
Enable IP multicast routing globally, enable PIM-DM on each interface, and enable IGMP on
GigabitEthernet 1/0/1. (Details not shown.)
Configuring Switch A
1. Create VLAN 100:
a. From the navigation tree, select Network > VLAN.
b. Click the Create tab.
c. Enter 100 as the VLAN ID.
d. Click Apply.
GE1/0/2 GE1/0/1
Router A
IGMP querier
Host B
GE1/0/2
GE1/0/1 GE1/0/3
Switch A
261
VLAN 100
Host A
Receiver