Item
Type
VLAN ID
Port
Setting the aging time of MAC address entries
1.
Select Network > MAC from the navigation tree.
2.
Click the Setup tab to enter the page for setting the MAC address entry aging time.
Figure 171 Setting the aging time for MAC address entries
3.
Configure the aging time for MAC address entries as described in
4.
Click Apply.
Table 53 Configuration items
Item
No-aging
Aging time
MAC address table configuration example
Network requirements
Use the Web-based NMS to configure the MAC address table of the device. Add a static MAC address
00e0-fc35-dc71 under GigabitEthernet 1/0/1 in VLAN 1.
Description
Set the type of the MAC address entry:
•
Static—Static MAC address entries that never age out.
•
Dynamic—Dynamic MAC address entries that will age out.
•
Blackhole—Blackhole MAC address entries that never age out.
The MAC tab (see
Figure
•
Config static—Static MAC address entries manually configured by the users.
•
Blackhole—Blackhole MAC address entries.
•
Learned—Dynamic MAC address entries learned by the device.
•
Other—Other types of MAC address entries.
Set the ID of the VLAN to which the MAC address belongs.
Set the port to which the MAC address belongs. This port must belong to the specified
VLAN.
Description
Specify that the MAC address entry never ages out.
Set the aging time for the MAC address entry.
175
169) displays the following types of MAC address entries:
Table
53.