Configuring An Snmp Group - HP 1920 Gigabit Ethernet Switch Series User Manual

Figure 107 Creating an SNMP Community
4. Configure the SNMP community as described in
5. Click Apply.
Table 35 Configuration items
Item
Community Name
Access Right
View
ACL

Configuring an SNMP group

1. Select Device > SNMP from the navigation tree.
2. Click the Group tab.
The Group tab appears.
Figure 108 SNMP group
Description
Set the SNMP community name.
Configure SNMP NMS access right:
•
Read only—The NMS can perform read-only operations to the MIB objects
when it uses this community name to access the agent.
•
Read and write—The NMS can perform both read and write operations to
the MIB objects when it uses this community name to access the agent.
Specify the view associated with the community to limit the MIB objects that
can be accessed by the NMS.
Associate the community with a basic ACL to allow or prohibit the access to
the agent from the NMS with the specified source IP address.
118
Table 35.