Configuring An Snmp View; Creating An Snmp View - HP 1920 Gigabit Ethernet Switch Series User Manual

Item
Location
SNMP Version

Configuring an SNMP view

Creating an SNMP view

1. Select Device > SNMP from the navigation tree.
2. Click the View tab.
The View tab appears.
Figure 102 View tab
3. Click Add.
The Add View window appears.
Figure 103 Creating an SNMP view (1)
4. Type the view name.
5. Click Apply.
The page in
6. Configure the parameters as described in
7. Click Add to add the rule into the list box at the lower part of the page.
Description
Set a character string to describe the physical location of the device.
Set the SNMP version run by the system.
Figure 104 appears.
Table 34.
115