Usb Interface Operation Guide; Configuring The X-Usb Card For Use In The Console - Behringer X32 User Manual

25
X32 RACK DIGITAL MIXER User Manual

6. USB Interface Operation Guide

Host system requirements for X-USB interface
expansion card
Check the BEHRINGER website at behringer.com for updates of X-USB firmware
or system requirements. Please find the recommended hardware/software
minimum configurations in the specifications section.
The BEHRINGER X-USB High-Performance 32-Channel
24-Bit USB Audio Interface
The X-USB card provides 32 channel, bi-directional audio I/O via USB 2.0 to
Mac or Windows PC. The simultaneous 32-in, 32-out audio channels enable
extremely powerful studio and live applications. You can run virtual live sound
checks or 32-track high-quality studio recordings, while at the same time
remote operating your DAW via HUI/MackieControl emulation. The high speed
24-bit signal transmission and ultra-low latency ASIO drivers and CoreAudio
compatibility even allow inserting audio plugins on your PC to perform advanced
outboard processing.
Configuration
After the console has fully booted up, you can access the Setup/Card screen to
view the current channel count configuration. Depending on your application,
you may want to select an option other than the maximum 32 x 32 channel count
to preserve system resources.
6.1 Configuring the X-USB card for use in
the console
The console will automatically detect the X-USB card during the regular boot
cycle, and it will display the card's presence in several instances.
The green square in front of "C: X-USB" indicates that the card is installed and
working properly.