Burn Grate, Igniter; Assembly Instructions; Burn Pot - Louisiana Grills LG700 Owner's Manual

POSITIONING THE BURN GRATE:
Tip !
The placement of the burn pot and burn grate is VITAL to a happy and
full range cooking experience!
Confirm the positioning of the Burn Pot

Confirm that the back of the burn pot has been pushed tight, into the
hopper and against the end wall of the grill ( A & B).

Confirm that the burn pot has been sealed with high temp caulking
around the inside of the barrel end.
Install the Burn Grate

The larger lip of the grate installs under the pellet fuel deflector (A)

The front lip of the burn grate should be sitting flush along the top of the burn pot . (C)

The bend at the rear of the grate should also being sitting tight to the back of the burn pot. (B)
Flame Broiler
B
Barrel End
Fuel Deflector
POSITIONING THE IGNITER:
Confirm the positioning of the Igniter
It is extremely important to have the igniter and the igniter hole in
the burn grate line-up.
The burn grate should not be sitting on top of the igniter or the
hot rod.
It may be necessary to remove the burn grate, then gently
holding onto the igniter assembly, gently lift or lower the
Igniter until it lines up properly.

Assembly Instructions

Diagram B
Bracket
B
Diagram A
B
A
A
Igniter
Burn Grate
C
Diagram C
C
A

Burn Pot

Igniter
12