Technical Characteristics - Immergas CARV2 Instructions For Use Manual

14. TECHNICAL CHARACTERISTICS
• Dimensions (LxHxD): ..................................................................................................................................142 x 103 x 31 (mm)
• Power Supply: ................................................................................................ 24V nominal via twin-wire communication Bus
• CAR_BUS protocol power supply voltage: .............................................................................................................. 24 ÷ 35 Vdc.
• CAR_BUS protocol maximum input: ............................................................................................................. 10 mA - 350 mW.
• IMG_BUS protocol maximum power supply voltage: .................................................................................................... 18 Vdc.
• IMG_BUS protocol maximum input: ............................................................................................................. 23 mA - 250 mW.
• Functioning room temperature: .................................................................................................................................... 0 - +40°C
• Warehouse temperature: ..............................................................................................................................................-10 - +50°C
• Protection rating according to EN 60730: .................................................................................................................................. II
• Protection rating according to EN 60529: ............................................................................................................................IP 20
• Connection technique: ........................................................................................................................................2 polarised wires
• Load reserve time: ......................................................................... 8 hours for hourly count (with at least 2 hours of charge)
• Connection cable max. length: ....................................... 50 m (with cable of 2x0.75mm ) (0.5 ÷mm min - 1.5 mm max)
2 2 2
• Precision indication room temp.: .....................................................................................................................+/- 0.5°C a 25°C*
• NTC room temp. sensor: ............................................................................................................................................50 k at 25°C
• Clock indication diversion ........................................................................................................................... +/- 15 minutes/year
* = the indication of the room temperature can be affected by the point of installation of the CAR remote control (e.g.
V2
hot wall, cold wall, height from the ground, etc.)
30