Holidy (Holiday Program); Legion (Anti-Legionella Function ); Remote (Telephone Control); 11.6 Code - Immergas CARV2 Instructions For Use Manual

system with a lot of heat inertia (e.g. floor-
20
standing system)
- AUTO A (self-learning), defines the activation of self-
learning, as per standard set at OFF. This function allows
the CAR V2 remote control to vary the offset, adapting it
to the room in which it is installed.
11.3 HOLIDY (holiday program).
From winter functioning mode it is possible to define a number
of days (from 1 to 99) during which the system deactivates
both the hot water heating function and the room central
heating function.
The value is decreased every midnight in the day change. At the
end of the days set (the meter reaches 0) the previously active
functions are restored. The activation of the holiday function
is indicated by the flashing of the
days remaining.
The holiday function can be deactivated by pressing the
button.
In the event of remote activation from telephone control, the
boiler is activated with the settings of the telephone control,
omitting the Holiday program.
N.B.: the room anti-freeze function is however guaranteed
also in holiday mode.
icon and the count of the
11.4 LEGION (anti-legionella function ).
Allows to activate the Anti-legionella function that takes
the temperature of the cylinder to maximum allowed for 20
minutes. It is possible to select between the once a day at 2 in
the night (ON 24H), every 7 days on Monday at 2 in the night
(ON 7 DAYS) or deactivate it (OFF standard function).
N.B.: the function must only be activated in presence of boiler
and eventually a thermostatic valve must be installed at the
DHW output to prevent burns.
11.5 REMOTE (telephone control).
Allows to set the functioning of the CAR
in a way that, in the event of remote activation, it functions
with the automatic time program if set at AUTO. Vice versa,
it functions at continuous comfort temperature (without time
program) if set at ON.
In the event of activation, it displays the flashing (
11.6 CODE.
To use this function, see the "Functions protected by code"
chapter.
remote control
V2
) icon.
27