Information - Immergas CARV2 Instructions For Use Manual

8.

INFORMATION

By pressing the button, access a menu that allows to
verify the functioning state of the CAR
If a determined value is not present "--" will be displayed.
The display of the "info" is subject to the boiler model and
the method of connection of the CAR
Press the button repeatedly to scroll the list
To go back to normal functioning mode, press the
button or wait 60 seconds.
The parameters that can be displayed are listed below:
- EXT T: external temperature (the optional external
temperature probe if present).
- HF TMP: Central heating circuit flow temperature.
- HR TMP: central heating circuit return temperature.
- DWIN T: DHW input temperature.
- DHW T: DHW output temperature.
- PAN T: solar collector temperature.
- CH PRS: system pressure, central heating circuit.
- SERVIC: Days remaining before periodic maintenance.
- VER P "x": "x" identifies the type of communication
protocol with the boiler in use:
VER PC = CAR-Bus; VER PI = IMG-Bus.
- ZONE: Not used on this model.
remote control.
V2
N.B.: the sizes displayed depend on the type of boiler to
remote control.
V2
which the CAR
.
The display shows the firmware version of the CAR
remote control
remote control is connected.
V2
V2.
21