Cooling Mode Functions; Manual Functioning - Immergas CARV2 Instructions For Use Manual

7. COOLING MODE FUNCTIONS
With the CAR remote control in cooling mode ( ), the
V2
of DHW heating and room cooling functions are enabled.
Important: this function can only be used with boilers that
an be coupled with a chiller.
Two main functioning modes can be selected: automatic or
manual. Plus a forced automatic timed program.
- Manual ( ): the room temperature is kept constant
at the value set by the user every time, according to
requirements.
- Automatic ( ): the room temperature is regulated on
two levels (comfort and economy) during the day via a
program set by the user.
- Forced automatic ( flashing): the room temperature is
modified momentarily with respect to automatic functioning
until the successive passage between comfort and energy
mode of the automatic program set.
7.1 Manual functioning.
By pressing the
automatic to manual functioning.
Once manual functioning mode is set, the
on on the display (fig. 17).
To set the desired room temperature, just press the + / -
buttons and the room temperature set will appear on the
button, pass alternately from
icon switches
display (fig. 18). Just wait a few seconds to confirm the
new value.
In manual functioning mode it is possible to select any
room temperature from +15°C to +40°C, which will be kept
constant until new adjustments or selection of a different
functioning mode.
Fig. 17
Fig. 18
19