Summer Mode Functions; Dhw Temperature Setting; Dhw Timer (For Storage Tank Unit) - Immergas CARV2 Instructions For Use Manual

5. SUMMER MODE FUNCTIONS
With the CAR remote control in summer mode ( ), only
V2
the production of DHW is enabled.
The boiler produces hot water according to the DHW
temperature set on the CAR
5.1 DHW temperature setting.
By turning the selector (
temperature of the DHW (see fig. 12).
By turning in a clockwise direction the temperature
increases and in an anti-clockwise direction it decreases.
The temperature is memorised after the selector remains
still for a few seconds.
remote control.
V2
) it is possible to set the
Fig. 12
5.2 DHW timer (for storage tank unit).
If the temperature of the DHW contained in the DHW
storage tank on two distinct levels (comfort and minimum)
is to be regulated, this is possible using the "HW PRG"
function. Regarding this, see the activation mode in the
chapter relative to programming.
The "comfort" temperature corresponds to the value
regulated on the DHW selector. The "minimum" temperature
corresponds to the minimum DHW value envisioned for the
boiler to which the CAR
V2
N.B.: if the CAR
remote control is functioning at
V2
minimum temperature level it is possible to force the DHW
temperature by acting on the DHW selector.
The CAR remote control is factory set with the DHW
V2
always activated on "comfort" temperature (ON1 00.00
OFF1 24.00).
remote control is coupled.
15