Start-Up; Programming Current Day And Time; Selection Of Functioning Mode - Immergas CARV2 Instructions For Use Manual

4.

START-UP

4.1 Programming current day and time.
Switch the remote control on by turning the main selector
onto one of the functions available.
Press the button
mode and press the
On entering the programming mode, the time starts to flash.
Modify the hour and minutes by pressing the + / - buttons
and the button to confirm. Select the day of the week
and confirm using the
Once regulation has been completed, press the
to escape the regulation mode.
12
to enter time and current time
button to modify the settings.
button.
4.2 Selection of functioning mode
According to the functioning mode selected, the CAR
remote control performs the requests of the user, displaying
the results on the display.
By turning the main selector (ref. 1 fig. 6) the following
functions can be selected: Stand-by/Anti-freeze, Summer,
Winter, Cooling.
Note: the room anti-freeze function is active in the following
modes: antifreeze, summer, winter.
• Off mode. The room anti-freeze function is not
button
guaranteed in this mode (the boiler anti-freeze function
remains active). The CAR
remains powered and therefore the times and programs
remain memorised.
Fig. 7
remote control is off but
V2
V2