Replacing The Service Door - HP Laptop User Manual

2. Slide the service door toward the front of the computer (4) and lift (5) to remove the service door.

Replacing the service door

Replace the service door after accessing the memory module slot, hard drive, regulatory label, and
other components.
1. Tilt down the service door to align the front edge of the service door near the front edge of the
computer (1).
2. Insert the alignment tabs (2) on the rear edge of the service door with the notches on the
computer.
3. Slide the service door toward the battery bay until the service door snaps into place.
ENWW Using hard drives 67