3.
Insert the battery (1) into the battery bay at an angle and then press down on the battery (2) until
it is fully seated.
The battery release latch (3) automatically locks the battery into place.
Removing a battery
To remove the battery:
CAUTION:
information. To prevent loss of information, save your work and shut down the computer through
Windows before removing the battery.
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Remove the service door. See
3.
Slide the battery release latch (1) to release the battery, and then lift the battery (2).
ENWW
Removing a battery that is the sole power source for the computer can cause loss of
Removing or replacing the service door on page
66.
Setting power options
55