Fine-Tuning The Screen - Samsung Smart TV E-Manual

When Aerial Source is set to Terrestrial or Cable
●
Digital Channel Tuning
Scans for a digital channel.
11
Select the New.
"
When selecting
"
When selecting
21
Select the Search. When scanning has finished, a channel is updated in the channel list.
●
Analogue Channel Tuning
Scans for an analogue channel.
11
Select the New.
21
Set the Programme,
31
Select the Store. When scanning has finished, a channel is updated in the channel list.
Channel mode
●
P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●
C (aerial channel mode) /
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.

Fine-Tuning the Screen

Broadcasting > Channel Settings
"
Available for analogue broadcasts only.
Analogue pictures can become shaky and full of noise. If this happens, you can fine-tune the signal
and/or reduce noise to clear up the picture.
11
Select Channel Settings
21
Make adjustments using the Samsung Smart Control until the picture clears up and then select
Save or Close. Select
Aerial → Terrestrial: Channel, Frequency,
Aerial → Cable: Frequency, Modulation,
Colour System, Sound
S (cable channel mode)
> Fine Tune
> Fine Tune. An adjustment bar appears on the screen.
Reset to reset the Fine-Tune operation.
Bandwidth
Symbol Rate
System, Channel
Try Now
and Search.