Cub Crafters CC18-180 Maintenance Manual page 93

CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
1. GENERAL
The information gives the general servicing procedures and maintenance practices that are to
be used when servicing the airplane. For additional detailed information concerning unit
servicing of the various airplane systems and components, refer to the applicable chapters. For
electrical wiring diagrams, refer to the Wiring Diagram Manual.
The intervals specified in Chapter 5 are considered adequate to meet average requirements
under normal operating conditions. However, it is advisable to shorten service and maintenance
intervals when operating under abnormal environmental conditions, such as high humidity and
moisture, salt water environments, dusty atmospheric conditions, extreme temperature ranges,
unimproved airport facilities or other unusual operating requirements. In salt water areas special
care should be taken to keep the engine, accessories and airframe clean to help prevent
oxidation.
CAUTION
The operation of the airplane can be seriously impaired if unapproved or contaminated
fuel, oil, fluids, lubricants or materials are used. Adherence to instructions, cautions, and
warnings can avoid injury to personnel and damage to the airplane or associated
equipment.
Mixing of various brands, types and weights of materials should be avoided. Specified lubricants
will meet requirements for extreme hot or cold temperature operations. Use of substitutes or
other lubricants may cause a malfunction when operating in extreme temperature conditions, or
may cause excessive wear due to improper lubrication.
12-00
Manual number TC10000AMM
Page: 2 Date: 07/18/12