1 GENERAL
This section will describe the methods for jacking the CC18-180.
2 MAINTENANCE PRACTICES
2.1 JACKING THE AIRPLANE
2.1.1 TOOLS, EQUIPMENT AND SUPPLIES
Description
Floor Jack
Wooden Saw Horse or Bench
Cub Crafters' Wing Jack
Do not jack the aircraft outside or in open hanger with winds in excess of 10 m.p.h.
Raise airplane no more than required for maintenance being performed.
2.1.2 RAISING THE TAIL
Set parking brakes and place chocks under main wheels.
a.
Grasp the lift handle and raise the airplane to place a tripod or saw horse under the tall wheel
FIGURE 07-00-1.
b.
07-00
Page: 2
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
P/N or Spec.
-
-
-
CAUTION
NOTE
wheel springs as indicated in
Supplier
Purpose
Any Source
Jack Main Wheels
Any Source
Place Under Tail
Any Source
Jack From Wing
Manual number TC10000AMM
Date: 6/30/14