Cub Crafters CC18-180 Maintenance Manual page 6

List of Effective Pages
REV PAGE NUMBER
NC All
A 00-00 Page 2
06-00 Page 5
B Chapter 00: all pages
Chapter 04-00 all pages Updated footer.
Chapter 04-00 Page 3
Chapter 05-20: all pages Updated footer.
05-20 Page 7
Chapter 05-30: all pages Updated footer.
05-30 Page 4
Chapter 71-90
C Chapter 00: Pages i, ii, iii Revision to manual, Updated
Chapter 04-00: Pages 1
and 6
Chapter 06-00: All
Pages
Chapter 08-00: All pages Added Float data and figures,
Chapter 32-00: Pages 1
and 4
Chapter 32-60: All pages Added to Manual
Chapter 95-00: All pages Added to Manual
D Chapter 00-00: Pages I
& ii
Chapter 28-00: Pages 1
through 6 and 13
E Chapter 04-00: Page 3
and Page 5
00
Page: iv
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
CHANGE
Initial Issue
Mailing address removed
Rudder control travel angle 25°±2°
was 20°±2°.
Revision to manual, updated footer
Removed TC3001-001, TC3001-
002 from replacement part table.
Added Vacuum pump and filter to
inspection table.
Added Vacuum filter to operational
and functional check table.
Added new Chapter 71-90 Vacuum
System
footer
Added Float Data and Updated
Footer.
Added Float data and figures,
Updated footer
Updated footer
Added Float Data and updated
footer
Revision to manual
Added information for Fuel Vent
Check Valve.
Structural Limitations modified:
3,000 hours for TC3200-001 & -002
was 2,000 hours; 20,000 hours for
TC3101-001 & TC2566-001 was
2,000 hours; 9,000 hours for
TC3300-001 was 2,000 hours;
limitations added for TC3001-001 & -
001 and TC3002-001 & -002.
Modified Float callout to "2100A"
DATE PREPARED CHECKED
4/15/05 ECL
7/29/05 MO
9/21/05 RBB
11/15/05 KAH
1/10/06 ECL
4/15/08 SJT / JPB
Manual number TC10000AMM
Date: 12/29/14
ES
ECL
ECL
ECL
SJH