Cub Crafters CC18-180 Maintenance Manual page 43

Fuselage and Empennage Group
1 Fabric and Finish:
- Visual Inspection for Cracks and Deterioration
2 Battery, Box, and cables:
- Visual inspection
3 ELT:
- Installation and Condition of Battery and
Antenna
4 Fuel Lines:
- Visual Inspection for Security and Damage
5 Fuselage frame Tubing, Longerons, and Stringers:
- Visual Inspection for Damage and Corrosion
6 Rudder, Elevator and Stabilizer Trim Cables,
Turnbuckles, Guides, and Pulleys:
- Inspect for Tension, Safety, Wear, Damage,
Corrosion, and Operation
7 Stabilizer Yoke and Screw:
- Visual Inspection for End Play, Security, and
Excessive Wear
8 Rudder, Stabilizer, and Elevator Structures:
- Visual Inspection for Damage
9 Rudder Hinge Pins and Bushings:
- Visual Inspection for Excess Wear, and
Corrosion
10 Elevator Hinge Pins and Bushings:
- Visual Inspection for Excess Wear, and
Corrosion
11 Stabilizer Brace Wires:
- Visual Inspection for Corrosion, Tightness, and
Safety
12 Lubricate per Figure 12-20-01
Manual number TC10000AMM
Date: 11/20/12
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
Interval
Ref.
100 Special
X
X
ACK
Technologies
E-01
X
Installation
& Ops
Manual
Artex
ME-406
X
Installation
and Ops
Manual
X
X
X
X
X
X
X
X
X
Initials
05-20
Page: 11