Cub Crafters CC18-180 Maintenance Manual page 39

Engine Group (continued)
22 Exhaust Stacks, Connections, Gaskets, and Braces:
- Visual Inspection
- Replace Exhaust Gaskets, as Required
23 Muffler, Heat Exchanger, and Hoses:
- Remove shroud
- Visual inspection
24 Oil Breather Tube:
- Visual Inspection for Obstructions and Security
25 Crankcase:
- Visual Inspection for Cracks, Leaks, and Security of
Case Bolts
26 Engine Mounts:
- Visual Inspection for Cracks and Distortion and
Security
27 Engine Baffles:
- Visual Inspection for Damage and Security
28 Rubber Engine Mount Bushings:
- Visual Inspection for Deterioration
29 Firewall and Seals:
- Visual Inspection
30 Cabin Heater Control:
- Visual Inspection
31 Alternator:
- Visual Inspection for Condition, Security, and
Tension of Drive Belt
32 Starter:
- Visual Inspection for Condition and Security
33 Engine Controls:
- Check Travel from Stop to Stop and Lubricate
34 Engine Cowl:
- Install, Ensuring Good Clearance
35 Vacuum Pump Filter (if optional vacuum pump is installed):
- Visually Inspect for Excessive Contamination
Manual number TC10000AMM
Date: 11/20/12
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
Interval
Ref.
100 Special
X
50 hours
X
X
X
X
X
X
X
X
X
X
X
X
Initials
05-20
Page: 7