Cub Crafters CC18-180 Maintenance Manual page 38

Engine Group (continued)
11 Electrical Wiring to Engine and Accessories:
- Visual Inspection
- Replace Damaged Wires and Clamps
- Visual Inspection of Terminals for Security and
Cleanliness
12 Ignition Harness and Insulators:
- Visual Inspection for High Tension Leaks and
Continuity
13 Magnetos:
- Check Magneto to Engine Timing and Adjust, if
Needed
14 Magnetos:
- Inspect Plug Wires and P-lead for Condition and
security
- Verify Vent Hole is Clean and Clear of Obstructions
15 Magnetos:
- Remove and Inspect IAW the Latest Version of the
Unison L-1363 Maintenance Manual
16 Induction Air Filter:
- Remove, Inspect, and Clean.
- Replace at 500 hours, or when filter is more than
50% covered by foreign material
17 Carburetor:
- Drain and Clean Inlet Line Fuel Strainer
18 Induction Air Box:
- Visual Inspection Condition
19 Intake Seals:
- Visual Inspection for Leaks and Clamps for
Tightness
20 Flexible Fuel and Primer Lines:
- Visual Inspection Condition
21 Throttle, Mixture Controls:
- Visual Inspection for Proper Travel and Operating
Condition
05-20
Page: 6
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
Interval
Ref.
100 Special
X
X
Unison
X
Manual
L-1363
Unison
X
Manual
L-1363
Unison
Manual 500 hour
L-1363
500
hours, or
X
50%
covered
X
X
X
X
X
Manual number TC10000AMM
Initials
Date: 11/20/12