Cub Crafters CC18-180 Maintenance Manual page 377

(1) REMOVAL
(a) Disconnect the power cable (1).
(b) Unbolt the starter attachment bolt (3) and nut (2).
(2) INSPECTION
(a) Visually inspect the teeth of the starter gear and starter's housing for damage.
(3) INSTALLATION
(a) Secure the starter using new lock washers (2, 3).
(b) Torque the bolts (3) and nuts (2) to 95-105 in/lbs.
(c) Attach the power cable using the metric nut and new lock washer (1). Torque the
nut to 50-60 in/lbs.
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
CAUTION
Do not over torque the nut on the copper stud.
80-00
Page: 3