(1) REMOVAL
(a) Disconnect the inboard hose fittings (1) from the elbows that go into the
accessory case.
(b) Remove the inboard brace bolts (2) from the case.
(c) Remove the inboard through-bolts (3) that hold the braces at the oil cooler (8)
end.
(d) Remove the rear bolt (4) on the outboard brace.
(e) Remove the outboard through-bolts (5) and carefully remove the oil cooler (8).
(f) Disconnect the hoses (6) from the oil cooler elbows (7).
(g) Remove the elbows (7) from the oil cooler (8).
(2) INSTALLATION
1 - Elbow
2 - Oil Cooler
3 - Through Bolt
(View looking from the center of the engine, outboard)
79-00
Page: 10
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
4 - Washer
5 - Nut
6 - Short Spacer Tube
Figure 79-00-6 - Oil Cooler
7 - Long Spacer Tube
Manual number TC10000AMM
Date: 05/20/08