General - Cub Crafters CC18-180 Maintenance Manual

(1) GENERAL

(a) The oil filter is mounted on a machined aluminum oil filter adapter (2) installed on
the pad of the oil pressure screen housing at the top, center of the accessory
case.
(b) The oil filter adapter (2) uses the standard Lycoming thermostatic bypass valve
(Vern-a therm) (9) for control of the engine's temperature and as an oil cooler
bypass valve. Problems with oil temperature or oil pressure should be
approached in the same manner as if the engine was equipped with a Lycoming
spin-on oil filter adapter or oil screen housing (Refer to the Engine Operator's
Manual).
(c) The oil filter adapter (2) does not provide a bypass valve so it is important that
the proper bypass filter is used.
(d) The oil filter adapter (2) does not need to be removed for routine maintenance.
1 - Safety Wire
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
2 - Oil Filter
Figure 79-00-4 Spin-On Oil Filter
3 - Bolts
79-00
Page: 7