Inspection; Installation - Cub Crafters CC18-180 Maintenance Manual

(2) INSPECTION

(a) Inspect the screen (2) for metal particles.
If examination of the suction screen indicates abnormal metal content, additional
service may be required to determine the source and possible need for corrective

(3) INSTALLATION

(a) Insert the screen (3) and plug (1) with a new copper crush gasket (2) with the
unbroken surface against the plug.
(b) Turn the plug until the sealing surfaces are in contact and tighten 135º.
(c) Safety the plug with 0.032 safety wire.
(d) Service the engine with oil (Refer to 12-20).
(e) Run the engine and check for correct oil pressure and oil leaks. (Refer to 05-30).
(f) Check the oil level.
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
CAUTION
maintenance
79-00
Page: 5