Inspection; Installation - Cub Crafters CC18-180 Maintenance Manual

Do not damage the temperature probe wire while separating the screen housing from the
(d) Drain the oil from the housing and remove the screen (2).

(2) INSPECTION

(a) Inspect the screen (2) and inside the housing (3) for foreign particles.
If examination of the pressure screen indicates abnormal metal content, additional
service may be required to determine the source and possible need for corrective
(b) Remove the old gasket (1) and make sure the housing and case surfaces are
clean.

(3) INSTALLATION

(a) Assemble the screen (2) in the housing (3), assemble the gasket (1) and the
housing (3) on mounting pad.
(b) Ensure that the gasket is properly oriented.
(c) Using new lock washers (8), secure the housing with 4 bolts (7), torque to 92-100
in/lbs.
(d) Remove the rag and clean all excess oil from the engine, firewall and muffler.
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
CAUTION
accessory case.
CAUTION
maintenance
79-00
Page: 3