Motor Mount Mixture Cable Attachment - Cub Crafters CC18-180 Maintenance Manual

Refer to Figure 76-00-8
(a) The mixture control mounting bracket (7) is fastened to the lower left side of the
instrument panel with 4 screws (2), washers (1), and nuts (3).
(b) The mixture control knob (4) is secured to the mounting bracket (7) with a lock
washer (8), and a nut (9).
(c) The mixture knob (4) should have enough movement so that the carburetor
mixture lever contacts the stops at both extents of its travel and there should not
be more than ¼" cushion (5) between the knob (4) and the panel nut (6) in the
full rich position.

(2) MOTOR MOUNT MIXTURE CABLE ATTACHMENT

1 - Bolt
2 - Washer
3 - Nut
Figure 76-00-9 - Attachment of Mixture Bracket to Engine Mount
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
4 - Nut
5 - Washers
6 - Bolt
7 - Mixture Bracket
76-00
Page: 9