Throttle Cable To Carburetor Arm Attachment - Cub Crafters CC18-180 Maintenance Manual

(5) THROTTLE CABLE TO CARBURETOR ARM ATTACHMENT

1 - Bolt
2 - Bushings
3 - Washer
Figure 76-00-7 - Attachment of Throttle Cable to Carburetor Arm
Refer to Figure 76-00-7
(a) The throttle cable is secured to the carburetor arm with a bolt (1), through-
bushings (2), a washer (3), a nut (4), and a cotter pin (5) as shown in the figure.
(b) The throttle travel can be adjusted by screwing the fork or sliding the cable
housing in the clamp at the throttle link bracket. Be sure that the clamp and the
fork jam nut are retightened after making any adjustment.
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
4 - Castle Nut
5 - Cotter Pin
6 - Split Washer
7 - Nut
76-00
Page: 7