Lever Attachment; Lever Interconnect Linkage - Cub Crafters CC18-180 Maintenance Manual

(1) LEVER ATTACHMENT

Refer to Figure 76-00-1
(a) Each lever is installed onto a bolt that is welded on the fuselage frame as shown
in Figure 76-00-2. Each control has friction washers on either side of the control,
which is secured with a friction lug (3), washers (4), a short castle nut (5), and a
cotter pin (6).
(b) The interconnect link is secured to the throttle levers with cotter pins (6).
(c) The throttle cable end is secured to the front throttle lever with a washer (7) and
a cotter pin (6).

(2) LEVER INTERCONNECT LINKAGE

1 - Knob
2 - Lever
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
Figure 76-00-2 - Throttle Interconnect Linkage
View from the cockpit, looking outboard
Forward
3 - Interconnect Link
4 - Throttle Cable
76-00
Page: 3