2. MAINTENANCE PRACTICES
A. MAGNETOS
1 - Magneto (2X)
2 - Nut (4X)
3 - Lock washer (4X)
(1) REMOVAL
PRIOR TO REMOVING THE MAGNETOS, MAKE SURE THE FUEL MIXTURE IS
IN IDLE CUTOFF POSITION AND THE MAGNETOS ARE TURNED OFF.
(a) Find the # 1 cylinder firing position by removing a spark plug from the No.1
cylinder and placing a thumb over the spark plug hole. Rotate the crankshaft in
the direction of normal rotation until the compression stroke is reached; this is
indicated by a positive pressure inside the cylinder tending to push the thumb off
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
Figure 74-00-2 - Magneto Installation
WARNING
4 - Clamp (4X)
5 - Aft gasket (2X)
6 - Forward gasket (2X)
74-00
Page: 3