Carburetor Heat; Installation Of Cable To Airbox Arm Swivel Fitting - Cub Crafters CC18-180 Maintenance Manual

C. CARBURETOR HEAT

(1) INSTALLATION OF CABLE TO AIRBOX ARM SWIVEL FITTING

1 - Cable Rod
2 - Stud
3 - Swivel Fitting
Figure 71-60-4 - Installation of Carburetor Cable Swivel
(a) Install the items as shown in Figure 71-60-4.
(b) Adjust the cable rod (1) length at the swivel fitting (3) to ensure that the butterfly
valve travel has full travel.
(c) Tighten the short castellated nut (6) enough to hold the cable rod firmly but not
so tight as to shear it or strip the treads.
(d) Safety the nut with a cotter pin (7).
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
4 - Butterfly Arm
5 - Washer
6 - Short Castellated Nut
7 - Cotter Pin
71-60
Page: 7