Inspection - Cub Crafters CC18-180 Maintenance Manual

(a) Remove the air filter (2) (Refer to 71-60-2A(1)).
(b) Remove the lower cowl (Refer to 71-10).
(c) Disconnect the carburetor heat air duct (5).
(d) Mark the position of the carburetor heat control cable clamp (4) on the cable and
disconnect the cable (4) from the air box.
(e) Disconnect the cable attachment swivel (3) from the butterfly arm.
(f) Cut the safety wire (6) that holds the bolts (7).
(g) Remove the bolts (7).

(2) INSPECTION

(a) Visually inspect the butterfly valve and shaft for security and wear. Pay close
attention to the state of the welds that attach these parts.
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
71-60
Page: 5