Cub Crafters CC18-180 Maintenance Manual page 323

1 - Lower Brace Attach
4 - Seam Screws
7 - Lower Rear Attach Screws
1.1.3 INSTALLATION
a. Carefully position the lower cowl in place.
b. Install the 2 rear lower cowling attach screws, washers and nuts (7).
c. Attach both, engine mount to cowl braces, at the lower end with bolts,
d. Reattach the hose clamp to the front left of the cowl with the screw and
e. Carefully position the upper cowl in place.
f.
g. Secure the front cowl seam with the 8 screws and washers at the front
h. Install the 2 rear upper cowling attach screws, washers and nuts (6).
Manual number TC10000AMM
Date: 12/29/14
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
2 - Hose Clamp Screw
5 - Air Filter Dome
Figure 71-10-1 - Engine Cowl
washers, and nuts (1).
washer (2) making sure the hose is not rubbing on anything.
Replace the lock washers with new and secure the lower end of both cowl
stiffeners with the 4 lower screws and washers at the front of the cowl (3).
seam (4).
3 - Lower Stiffener Screws
6 - Upper Rear Attach Screws
8 – Upper Stiffener Screws
71-10
Page: 3