Cub Crafters CC18-180 Maintenance Manual page 259

vi) EMERGENCY HAND PUMP LIGHTS (Amphibious Float Option Only)
(3) REMOVAL
(d) Disconnect LED harness.
(e) Remove nut and washer from outboard face of seat base.
(f) Remove light from panel.
(4) INSTALLATION
(g) Install light and washer.
(h) Attach washer and nut, locating panel between the (2) nylon washers. (Do not
over tighten to allow light adjustment)
(i) Connect LED harness.
Manual number TC10000AMM
Date: 05/21/14
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
33-00
Page: 7