Cub Crafters CC18-180 Maintenance Manual page 250

1. GENERAL
The CC18-180 has the option of being fitted with Wipaire 2100S Seaplane Floats.
This chapter of the maintenance manual will give instructions for the installation and removal of
the floats. For instructions for continued airworthiness related to the floats, refer to Wipaire
manual WIPLINE MODEL 2100 / 2350 FLOAT SERVICE MANUAL.
2. MAINTENANCE PRACTICES
A. INSTALLATION AND REMOVAL OF WIPAIRE 2100S SEAPLANE FLOATS
(1) AIRCRAFT CONFIGURATION
(a) Select the appropriate configuration for the fuselage modifications (Table 32-61-1).
CONFIGURATION
A*
B**
C**
* Aircraft listed under configuration A do not require fuselage modifications.
** If the fuselage frame on any of the aircraft listed under configurations B or C is
changed for a fuselage frame built to drawing TC2800 Rev E or later, install Wipaire
2100S floats per configuration A.
(2) INSTALLATION AND REMOVAL
(a) Install and remove floats in accordance with latest revision of Cub Crafters
drawing TC4200.
(b) Ensure that the changes are entered in the aircraft log book's weight and balance
section.
32-61
Page: 2
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
AIRCRAFT SERIAL NUMBER
0008, 0009, 0011 and
Subsequent
0003, 0004, 0005, 0006, 0010
0001, 0002, 0007
Table 32-61-1 - Fuselage Configuration
FUSELAGE DRAWING
Install Floats per TC4200
Modify Fuselage per TC10016, 125700,
and 125701
Install Floats per TC4200
Modify Fuselage per TC10016, 125700,
and 125701
Install Floats per TC4200
Manual number T10000AMM
Date: 11/20/12