Maintenance Practices; Installation And Removal Of Wipaire 2100A Amphibian Floats; Aircraft Configuration - Cub Crafters CC18-180 Maintenance Manual

1. GENERAL
The CC18-180 has the option of being fitted with Wipaire 2100A Amphibious Floats.
This chapter of the maintenance manual will give instructions for the installation and removal of
the floats as well as the information necessary for setting the Amphibian Landing Gear Position
Advisory System. For instructions for continued airworthiness related to the floats and the
landing gear including the brakes, refer to Wipaire manual WIPLINE MODEL 2100 / 2350
FLOAT SERVICE MANUAL.

2. MAINTENANCE PRACTICES

A. INSTALLATION AND REMOVAL OF WIPAIRE 2100A AMPHIBIAN FLOATS

(1) AIRCRAFT CONFIGURATION

(a) Refer to drawing TC10200 and select the appropriate configuration for the
fuselage modifications (Table 32-60-1).
CONFIGURATION
A*
B**
C**
* Aircraft listed under configuration A do not require fuselage modifications.
** If the fuselage frame on any of the aircraft listed under configurations B or C is
changed for a fuselage frame built to drawing TC2800 Rev E or later, install Wipaire
2100A floats per configuration A.
(b) Select the appropriate drawing for the installation of the control panel depending
which of the two panels is selected.
32-60
Page: 2
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
AIRCRAFT SERIAL NUMBER
0008, 0009, 0011 and Subsequent
0003, 0004, 0005, 0006, 0010
0001, 0002, 0007
Table 32-60-1 - Fuselage Configuration
FUSELAGE DRAWING
Install Floats per TC10400
Install Floats and Modify
Fuselage per TC10500
Install Floats and Modify
Fuselage per TC10600
Manual number T10000AMM
Date: 04/17/2008