Cub Crafters CC18-180 Maintenance Manual page 242

2.2.2 INSPECTION
a. Inspect the piston and the inside of cylinder for grooving or wear. Only minor
scratches may be removed using fine emery cloth.
b. Inspect the O-rings for cuts or worn areas. Replace as needed.
c. Lubricate the O-rings and the piston with brake fluid prior to reassembly.
d. Ensure that the spring is resting in the piston on reassembly.
32-42
Page: 6
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
Figure 32-42-3 - Master Cylinder
Manual number T10000AMM
Date: 06/20/14