Cub Crafters CC18-180 Maintenance Manual page 241

2.2 MASTER CYLINDER AND PARKING BRAKE VALVE
1 - Screw
2 - Lock Washer
3 - Faceplate
Figure 32-42-2 - Brake Master Cylinder and Parking Brake Valve
2.2.1 REMOVAL
a. Remove the screws (1) with lock washers (2) in the faceplate (3) that secures the
master cylinder (5) to the base (4).
b. Disconnect the brake line (7) from the fitting on the bottom of the parking brake
valve (6).
c. Remove the master cylinder (5) with the parking brake (6) attached.
d. The master cylinder (5) can be unscrewed from the parking brake valve (6) if
needed.
Manual number TC10000AMM
Date: 06/20/14
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
4 - Base
5 - Master Cylinder
6 - Parking Brake Valve
7 - Brake Line
8 - Cap
9 - Gasket
32-42
Page: 5