Cub Crafters CC18-180 Maintenance Manual page 235

(b) Place the tube (12) in the tire (10).
(c) Insert the wheel hubs (8) with the gasket (9) in between into the tire and tube
assembly. Make certain the gasket (9) is properly aligned with tube valve and
hub bolt holes.
(d) Insert 4 bolts and engage with 4 nuts. Torque to 80-100 in/lbs.
(e) Inflate the tire to 38 pounds.
(f) Pack the bearings with grease (MIL-G-81322E).
(g) Insert a bearing (4), inner spacer (3), grease retainer (2) and spacer (1) into the
each wheel hub.
(h) To install on the airplane see Chapter 32-20 2.A.(7)(J).
Manual number TC10000AMM
Date: 4/15/05
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
32-41
Page: 9