Tail Wheel - Cub Crafters CC18-180 Maintenance Manual

(f) Safety the bolts in pairs with 0.032 safety wire.
(g) Lower the aircraft to the ground.
B. TAIL WHEEL
1 - Spacer
2 - Grease Retainer
3 - Inner Spacer
Care must be taken to avoid damaging wheel halves when breaking tire beads loose.
DO NOT ATTEMPT TO REMOVE VALVE CORE UNTIL TIRE HAS BEEN COMPLETELY
DEFLATED. IF IT IS UNSCREWED BEFORE THE AIR PRESSURE HAS BEEN RELEASED,
THE VALVE CORE WILL BE EJECTED AT A HIGH VELOCITY.
INJURY CAN RESULT WHEN ATTEMPTING TO SEPARATE WHEEL HALVES WITH THE
Manual number TC10000AMM
Date: 4/15/05
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
4 - Bearing
5 - Bearing Race
6 - Bolt
Figure 32-41-2 – Tail Wheel Assembly
CAUTION
WARNING
WARNING
TUBE INFLATED.
7 - Nut 10 - Tire
8 - Hub 12 - Tube
9 - Gasket
32-41
Page: 7