Cub Crafters CC18-180 Maintenance Manual page 220

1. GENERAL
The tail landing gear has a tail wheel assembly that swivels through 360 degrees and is
steerable via the rudder pedals. It is mounted to the fuselage with steel leaf springs.
2. MAINTENANCE PRACTICES
A. TAIL LANDING GEAR
(1) REMOVAL OF TAIL WHEEL AND LEAF SPRINGS
A - Nut
B - Washer (5)
C - Long Bolt
Figure 32-20-1 – Tail Wheel and Leaf Spring Installation
(2-Hole Configuration Shown. Some hardware omitted for 1-Hole configuration)
32-20
Page: 2
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
D - Clamp
E - Small Nut (2)
F - Small Washer (2)
G - Small Bolt (2)
H - Large Area Nut (2) K - Short Bushing
I - Short Bolt
Manual number TC10000AMM
J - Bolt
L - Long Bushing
Date: 04/17/08