Wheel Disassembly - Cub Crafters CC18-180 Maintenance Manual

(2) WHEEL DISASSEMBLY

See Figure 32-41-1
Care must be taken to avoid damaging wheel halves when breaking tire beads loose.
DO NOT ATTEMPT TO REMOVE VALVE CORE UNTIL TIRE HAS BEEN COMPLETELY
DEFLATED. THE VALVE CORE WILL BE EJECTED AT A HIGH VELOCITY IF IT IS
UNSCREWED BEFORE THE AIR PRESSURE HAS BEEN RELEASED.
INJURY CAN RESULT WHEN ATTEMPTING TO SEPARATE WHEEL HALVES WITH THE
(a) Deflate the tire.
(b) Break the tire bead loose from the wheel.
(c) Remove the wheel halve nuts (6) and washers (5).
(d) Pull the wheel halves (1, 3) apart being careful with the tubes valve stem.
(e) Remove the snap ring (11), grease seals (8, 9) and bearing (2). Repeat on other
wheel half.
Manual number TC10000AMM
Date: 4/15/05
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
CAUTION
WARNING
WARNING
TUBE INFLATED.
32-41
Page: 3