Cub Crafters CC18-180 Maintenance Manual page 203

(a) Lift the tail section of the airplane and rest the fuselage on a bench so the tail
landing gear clears the ground.
(b) Disconnect the chain links from the tail wheel arms.
(c) Remove the front tail spring attach nut (A) and washer (B).
(d) Disconnect the tail spring clamp (D) by removing the nuts (E), washers (F) and
bolts (G).
(e) To separate the springs from the tail wheel, remove the large area nuts (H),
washers (B), and bolts (I & J).
Manual number TC10000AMM
Date: 04/17/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
32-20
Page: 3