(d) Place a metal container under the bowl to catch the residual fuel.
(e) Twist bowl (6) to remove and empty the residual fuel.
(f) Remove the wire snap ring (4) with your fingers and gently remove the screen
(3).
(g) Inspect and clean the screen (3).
(h) Check the condition of the O-ring (2).
(i) Carefully install the screen (3) and hold it in place with the wire snap ring (4).
(j) Insert and twist the bowl (6) into position.
(k) Install the safety cotter pin (1).
(l) Turn on fuel and check for leaks.
(2) CARBURETOR INLET SCREEN SERVICING
Manual number TC10000AMM
Date: 01/10/06
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
Figure 28-00-3 - Carburetor Inlet Screen
28-00
Page: 7