Cub Crafters CC18-180 Maintenance Manual page 150

1 - Clevis Screw
2 - 3/16 Washer
3 - Castle Nut
4 - Cotter Pin
Refer to Figure 27-30-3
(3) Connect the upper link to the top of the elevator horns by holding the link and the
bushing (7) in position between both elevator horns. Insert a bolt (5), in the large
hole with a washer (6) under the head, through the elevator horns and secure it with
a washer (6) and a nut (8). Temporarily tighten finger tight.
(4) Connect the upper link to the top of the elevator horns by holding the link and the
bushing (7) in position between both elevator horns. Insert a bolt (5), in the large
hole with a washer (6) under the head, through the elevator horns and secure it with
a washer (6) and a nut (8). Temporarily tighten finger tight.
27-30
Page: 4
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
5 - ¼ Bolt
6 - ¼ Washer
7 - Bushing
8 - ¼ Bolt
Figure 27-30-3 Elevator Horn Installation
9 - 3/16 Bolt
10 - 3/16 Nut
Manual number TC10000AMM
Date: 4/17/08