Cub Crafters CC18-180 Maintenance Manual page 137

(g) (Refer to Figure 27-10-8) Place the aileron in the full "UP" position and slide the
aileron stop bracket along the hinge bracket until the upper stop tube just clears
the aileron hinge
Refer to Figure 27-10-9
(h) Install a bolt (1), washer (2) and nut (3) and tighten enough to hold the bracket
in place. Check and make sure there is 0 to 1/8 inch clearance between the
aileron horn and lower stop tube with aileron in the full up position.
Manual number TC10000AMM
Date: 05/20/08
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
Figure 27-10- 8 - Aileron Stops
Figure 27-10-9 - Aileron Stop Bracket
27-10
Page: 7