Cub Crafters CC18-180 Maintenance Manual page 136

Leave not more than 3 threads visible at each end of the turnbuckle barrels.
(e) Safety each turnbuckle barrel with 2 wire lock clips making sure the clip ends
are locked in the hole (Figure 27-10-6). Alternatively use the single wrap method
with 0.040 stainless safety wire.
Figure 27-10-7 - Adjustment at Control Stick Torque Tube
(f) (Refer to Figure 27-10-7) Adjust the aileron stops at the torque tube so the arm
(3) contacts the bolt head (2) when the aileron travel is 18º ± 2º up or down from
neutral. Tighten the jam nut (1) to hold in place.
27-10
Page: 6
CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
CAUTION
Figure 27-10-6 - Safety of Turnbuckles
Manual number TC10000AMM
Date: 05/20/08